Category: Newsflashes

New E-Crane begins operation at Kanawha River Plant

2008-02-07

GLASGOW, W.Va. — Kanawha River Plant is once again receiving much of its coal by barge thanks to the new E-Crane that began operation at the plant in January. From its perch atop a newly-constructed river cell, the E-Crane, or equilibrium crane, uses its large capacity bucket to move coal from barges to the plant’s coal yard. The equipment replaces the plant’s original crane which was retired several years ago.For some time now, we’ve had to rely exclusively on locally-available, truck-delivered coal, which means we often have 100 or so trucks in and out of here a...

E-Crane on the frontpage of DCi

2008-01-21

Pay E-Crane International Europe a visit @ Bulk Materials Handling (BMH) event

2008-01-21

Bulk Materials Handling Improving mine and port efficiencies and productivity through best bulk material handling practices 23 – 25 January 2008 Sheraton Towers SingaporeIBC Asia’s Bulk Material Handling Asia will combine real-life field experience from the mining industry across the Asia Pacific region with the most innovative global practices; showcasing the latest ideas and best practices you can use to make sure your bulk materials handling operations remain at its optimal level at an increased rate of efficiency.IBC Asia’s inaugural Bulk Materials Handling will feature some...

River Metals taps E-Crane – To Feed World’s Largest Shear

2008-01-07

The latest equipment acquisition for their River Metals operation in the Louisville Kentucky operation is a 1000 Series, Model 7317B rail mounted E-Crane with 104’ reach and 15 tons lift capacity feeding the world’s largest 3,000 Ton Henschel scrap shear.This E-Crane replaces several conventional material handlers and offers the following advantages: Flexibility and versatility: the primary duty for the E-Crane is to feed the big Henschel shear. However between shear cycles, the E-Crane unloads trucks, sorts and stockpiles sheared material. In addition to a 4 tine scrap grapple, the E-Crane...

Installation of the AEP Kanawha River Plant 1500 Series E-Crane

2007-12-27

Our on-site E-Crane® senior erection supervisor Steve Suter reports: “This is what we all at the AEP Kanawha River Plant have been striving for, working with a great group of people and working for a common goal to be the best ! It has rained nearly every day. We lost 1 day to high winds 40-50mph and 1 day to torrential down pours. But still found little things to do. We just finished the E-Crane® On Site Testing&Tuning program working closely together with AEP electrical engineer Jim Corey, so we are able to add another notch to our guns! With Kanawha River being the 5th E-Crane® Installation...

Tombigbee River Power Plant To Get E-Crane®

2007-10-12

Black & Veatch, a leading engineering and construction company, recently awarded E-Crane International- USA the major portion of a contract to upgrade material handling at one of Alabama Electric Cooperative’s power plants. The generating station, known as Charles R. Lowman Power Plant, is on the Tombigbee River near Leroy, Ala. Designed by Kent Hoffmeister of Global Marine Technologies, the floating material handling system will consist of a 2000 series, model 18264 E-Crane®, a receiving hopper and a feeder; all mounted on a 175 by 50-foot deck barge. It will receive coal and...

River Metals Recycling E-Crane Installation… feedback from our on-site erection team

2007-10-01

At E-Crane we fully understand that the most important factor in the productivity of any machine is the skilled operator! Skilled operators combine qualities such as: excellent visionmechanical knowledgegood sense of balanceability to judge distances and dimensionsability to concentrate for long periods of timeunderstanding of computerized machinerywillingness to update skills and acquire new knowledge. Every E-Crane installation is followed by on-site training of the operators and maintenance staff by our erection supervisors and this in close cooperation with the on-site management...

New Winchester golf news

2007-09-25

NEW WINCHESTER – New Winchester golf course recently completed its club champion- ship Mark Osborne won the championship flight and Rick Leppert was runner-up. Mike Kackameyer won the A flight with Guy Benedict second. Kathy Dyer won the women’s championship flight over Ruthie Robinson. The A flight champion was Ruthie Parker, with Judi Cripple runner-up. Saturday will be the 2nd Annual Big Spender open. The 18-hole event will have a $50 entry fee. The OSU game will be shown on the course’s big screen TV. Mark Osborne, PE ECI-USA said “I won my final match in...

EMM: versatile, user-friendly and extremely reliable crane control system

2007-09-24

E-Crane provides state-of-the-art technology working with you and for you! The new B-Series E-Cranes combine over twenty-five years of experience in heavy duty bulk material handling with the performance of the mobile CAN-bus technology. With the introduction of this Electronic Machine Management-system (EMM) E-Crane has created a versatile, user-friendly and extremely reliable crane control system. With the optional communications module our engineers can trouble shoot and solve problems from behind their computer. Science fiction… ? No, check out the case study below. Antwerp,...

AEP representatives inspect new 1500B Series E-Crane

2007-09-18

E-Crane Worldwide recognizes that the Factory Acceptance and Testing (FAT) is another important phase in our quality assurance program. We strongly believe that intensive factory acceptance tests: reduce the time for the erection of the crane at its final destinationreduce the costs for assembly, installation and tuningimprove the overall quality of our products After the factory tests and tuning are completed our cranes are disassembled into major components/packages for shipment to its final destination. The picture above: Inspection of the E-Crane for the AEP-Kanawha project....

Erection of Second E-Crane in Argentina Completed

2007-08-10

With the succesful and safe completion of Phase 2 of the installation of 2 new dedicated E-Cranes®, MultiServ, the service provider for the scrap handling at Acindar, is now ready to keep scrap moving because electric arc furnace (EAF) steel mills like Acindar rely on a steady stream of baskets filled with scrap metal to be ready as feedstock every hour of every day that the mill is up and running. The construction, shipping and installation of several big cranes involves many types of professionals such as engineers, designers, welders, electricians, mechanics and so forth. The crane’s...

Argentina: First erection phase of 1000 Series E-Crane successfully completed

2007-08-10

Villa Constitucion, Argentina, 10th of August 2007: The first erection phase of the 1000-series E-Crane® for the Acindar Steel Mill was safely completed.

E-Cranes prove efficient in bulk material handling

2007-08-09

Over 50% of the Electric Energy consumed in the USA is generated by fossil fuel (coal) burning power plants and this is not going to change in the near future. Utility companies burning fossil fuels require a carefully blended mix of coal which is sourced from US mines as well as Latin American and international suppliers to minimize fuel expenses and in order to meet increasingly stringent emission regulations. Now these fossil fuel burning power plants also need to offload limestone for their flue gas desulphurization systems to comply with emission regulations. As most US power...

Heavy Lifting goes on at Port Amherst

2007-07-05

By Rick Steelhammer, Staff writer Port Amherst, just east of Charleston on the Kanawha River, may not be an Antwerp or a Hamburg, but it does occasionally handle international cargo shipments. This week, the homeport for Madison Coal & Supply’s fleet of towboats and construction barges also served as the loading area for a huge new Belgian-made crane, which will eventually offload limestone at American Electric Power’s Cardinal power plant at Brilliant, Ohio. The 173-ton crane traveled across the Atlantic on a freighter, which made its way up the St. Lawrence Seaway to Lake...

Third E-Crane® Carinox Steelmill successfully commissioned

2007-07-04

Charleroi, Belgium, 4th of July 2007 – E-Crane is delighted to announce that the third E-Crane® for MultiServ’s scrap catering project at the Carinox steelmill is successfully and safely installed, commissioned and put into service on July 4th, 2007. According to Mr. Cédric Le Lann from MultiServ, this is another important step for MultiServ’s services at Carinox. As the steel mill is now approaching its design capacity of one million tons of stainless steel per year, this third E-Crane® for MultiServ is the final phase of significant investments to provide efficient...

Installation of 2 E-Cranes at MultiServ’s scrap handling steel mill in Argentina in full swing

2007-07-04

After another 250 Km long journey by truck to their final destination in Acindar’s Villa Constitucion plant, the erection process was started. Both MultiServ and E-Crane have an experienced team on site to assure a smooth and safe installation. Mr. Francois Schaeffer (Project Manager MultiServ) and Mr. Lieven Bauwens (Managing Director E-Crane) witnessing the loading of the components at the port of Zarate. In order not to disturb the operations of the terminal and to secure a timely arrival at the jobsite, the bigger E-Crane® assembly groups (packages) were loaded during night time! First...

Bedrijfsuitstap E-Crane Worldwide / Indusign

2007-06-22

Naar aanleiding van de deelname van een van onze afgevaardigd bestuurders aan de rally te Ieper, organiseerde E-Crane Worldwide / Indusign een bedrijfsuitstap op 22 juni 2007, een combinatie van een bedrijfsbezoek aan Galloo te Menen en een avond supporteren tijdens de Ieper Westhoek Rally. Bezoek aan Galloo site te Menen Wij arriveerden omstreeks 15u30 aan de poorten van de Galloo vestiging te Menen, waar we hartelijk ontvangen werden door dhr. Rik Debaere, Algemeen Directeur van Galloo. Na een korte bedrijfsvoorstelling en introductiefilm over de activiteiten van de Galloo Group,...

Jubilee Waterwegen & Zeekanaal vzw

2007-06-20

Waterwegen & Zeekanaal vzw exists for 25 years. They celebrated that on 5th June 2007 with an academic session and jubilee diner at the Lamot site in Mechelen, and with a jubilee brochure. E-Crane Worldwide / Indusign was one of the main sponsors. 1982-2007: 25 Years of Waterwegen & Zeekanaal vzw The goal of Waterwegen & Zeekanaal vzw (WenZ) is to promote and stimulate the use of our (Flemish) waterways. “Therefore, we have to keep optimizing those waterways and all their aspects”, writes Mr. Frans D’Haese, president of WenZ, in his foreword for the jubilee...

The USA – Bulk Handling from the States

2007-06-08

On 16 February this year, a 3000 Series E-Crane was fully assembled in three days, after a very complex transportation and erection process. E-Crane Worldwide/Indusign offers a complete package of services, including turnkey crane installations worldwide. Correct planning and transport engineering using the latest technology are essential to reducing the delivery time and costs. When you build and install very big equipment worldwide, like E-Crane Worldwide/Indusign does, you get involved in some of the largest and most complicated erection projects. The E-Crane project for the...

Successful introduction of E-Crane® in Bangladesh

2007-06-07

On the first of November 2006 the fourth E-Crane® in Bangladesh was succesfully put into service by Indusign / E-Crane Worldwide. Monem Sugar Refinery Abdul Monem Ltd is a leading roads and highways construction company, bottler of Coca-Cola and owner of “Igloo” ice cream. Its sister company Monem Sugar Refinery Ltd (MSRL) is capable of producing 300,000 tonnes of refined sugar annually. MSRL is using European and American technology and refines imported raw cane I sugar from the very best sources world-wide. It is expected that Monem Sugar Refinery Ltd. along with other...

Mark Osborne recorded hole-in-one during Men’s League play

2007-06-04

Mr. Osborne used a 6-iron to ace the 150-yard, par-3 eighth hole. The odds of getting a hole in one for the average golfer is more than 8,000 to 1 ! It should not be a surprise that getting an ace is a golfer’s biggest trill and it is said that it keeps a golfer in a good mood for the next 12 months. On behalf of the whole E-Crane team: Congratulations Mark! The picture above: Mark Osborne taking the ball out of the cup on number 8 at New Winchester Golf Course on 5-30-07!

Mobile Cranes: Technological Balancing Act

2007-05-15

The moment of tilt invariably plays a major role where cranes with long extension arms are deployed to lift and move heavy weights. In docks or railway facilities covering a wide area where, for example, bulk materials or scrap metal weighing several tonnes need to be moved, cranes of this type are nevertheless in their element. The Belgian company E-Crane Worldwide in Adegem has already been responding to this sophisticated technical challenge for more than 16 years with its special design “E-Crane®” (equilibrated crane): counterweights are used to bring into equilibrium the major part...

Bucyrus – A small area company moves big things here and abroad

2007-03-23

E-Crane International, 236 S. Sandusky St., is a state-of-the-art firm that helps design and implement E-Cranes® using equilibrium to move heavy objects. “We’re a small, but growing company,” said Mark Osborne, president. Operating from a modest office downtown, Osborne’s staff of eight full-time employees works on projects involving large cranes in places from California to Venezuela. Three of them are service engineers. “We began in 2000 in Marion, but moved here two years later,” Osborne said. To date the company has 30 projects and a full slate...

Catering for the coal boom

2007-03-22

The global demand for coal, particularly in Asia, shows no signs of abating and is expected to continue at least for the next few years. To cope with this record demand there is a wave of port expansion projects, both at existing terminals and new ones, and along with this is a good demand for coal handling systems. Not only are coal volumes being shipped at high levels, so too are the prices being paid. For example in January 2007 export prices for power station coal being paid at Newcastle, the Australian port which is the world’s largest coal export terminal, were above $50 a tonne....

Steam Coal Handling from the US Perspective: getting the right Balance

2007-03-20

Over 50% of the electric energy consumed in the USA is generated by fossil fuel (coal) burning power plants. Utility companies burning fossil fuels require a carefully blended mix of coal which is sourced from US mines as well as Latin American and international suppliers to minimize fuel expenses and to meet increasingly stringent emission regulations. Now these fossil fuel-burning power plants also need to offload limestone for their flue gas desulphurization sustems to comply with emission regulations. As most US power plants were built 30 to 40 – or more – years ago, utility...

Schelde-Natie’s new E-Crane® successfully unloads Panamax rapeseed cargo

2007-02-20

A common question is “does size matter?”. For Schelde-Natie in the port of Antwerp in Belgium, the answer is now “no”. Schelde-Natie can now offer efficient and immediate high-quality unloading of rapeseed using its new E-Crane®. The first Panamax vessel to be unloaded using the new crane arrived on 8 October last year. Unloading the Cargo gave the 1000- series E-Crane® a full workout. With an outreach of only 32 metres, and limited space on the dock and only 200 metres of crane rails along the quay, E- Crane engineers had to work closely with Schelde-Natie management...

3000 Series E-Crane® fully assembled in 3 days

2007-02-16

When you build and install very big equipment world-wide, like E-Crane® does, you get involved in some of the largest and most complicated erection projects. Our E-Crane® engineers develop transport and erection procedures that consider the full range of site constraints and we design comprehensive plans to erect our cranes in the safest and most efficient manner possible. The E-Crane® project for the new coal unloader at the Crystal River power station (Tampa, Florida) is a typical example of such a complex and complicated transport and erection process. The manufacturing and the initial shop...

New Year’s Reception 2007

2007-02-12

Finally, on Friday 26th January, the annual new year’s reception, organized by the direction of Indusign/ E-Crane Worldwide for their employees, could take off. As every year, the extra invitees were Mr. d’Ancona, Mrs. Hendrickx and Mr. Tolhuizen from ECI-Europe, and Mr. De Meyere from the production plant in Poland. Instead of making one long speech, executive director Lieven Bauwens divided his messages over several shorter intermezzo’s. Three oasts were made during the pre-diner drink, accompanied by lovely hors d’oeuvres by caterer Koen. A first toast was...

A Good Deal – on Balance

2007-01-04

They look very much out of place. That is often the first impression of an Equilibrium Crane (or balance crane) in action. Being used to ‘straightforward’ design of bulk loading and unloading equipment, the huge ‘block’ of counterweight on the back of the crane makes an awkward sight. But seeing the crane in operation one is made aware of the benefits of the “big hump on the back” and the design starts to make more sense. Due to their build simplicity balance cranes offer a much longer lifespan than other cargo handling equipment. The crane has low...

E-Crane® Receives New Contract from MultiServ

2007-01-03

E-Crane International USA has been awarded a new and important contract for the supply of several new scrap handling E-Cranes for the Villa Constitucion plant of Acindar Industria Argentina de Aceros SA. Supporting Acindar’s plans to further increase production and efficiency, the E-Cranes will play a key role in the comprehensive on-site scrap management services provided by MultiServ. The installation of these new E-Cranes is done on a turn-key basis and the cranes are expected to be fully operational by the middle of 2007. The cranes have been sized and designed in close cooperation...

Van nu af aan lost Schelde-Natie alle schepen, klein en groot

2006-11-11

“Is de grootte van belang…” vraagt men zich vaak af! Indien we het Schelde-Natie project op het Cargill dok (dok 506) in de Antwerpse Haven als maatstaf nemen, is het antwoord zonder twijfel “neen”!. Inderdaad, welke grootte uw aak, boot of schip ook heeft, Schelde-Natie biedt u een efficiënte en onmiddellijke 4-sterren service voor het lossen van koolzaad i.o.v. Cargill. Vroeg in de morgen op 8 oktober arriveerde een Panamax-schip aan het dok. Het was de eerste keer dat een schip van deze grootte gelost zou worden met behulp van de net geïnstalleerde E-Crane®. Met enkel 32 meter reikwijdte...

Nieuwe kraan vervangt graanzuiger bij Cargill

2006-11-09

Nieuwe kraan vervangt graanzuiger bij Cargill Bij Cargill in de Antwerpse haven werd onlangs een zogenaamde evenwichtsgrijperkraan of E-Crane® in gebruik genomen. Deze kraan vervangt de oude graanzuigers. De keuze voor dit type kraan werd onder meer bepaald door de besparing die ze oplevert op het vlak van energie en onderhoud en omwille van het lage geluidsniveau. De behandeling van granen en zaden voor Cargill aan kaai 506 in de Antwerpse haven is reeds 30 jaar in handen van Schelde-Natie, een onderdeel van de Nederlandse Schutter-groep, dat gespecialiseerd is in behandeling en controle...

Ohio Secretary of State visits ECI-USA in Bucyrus, OH

2006-11-09

On the first of november 2006, Mr. Blackwell and his staff visited the ECI-USA offices in Bucyrus Ohio ! John Kenneth Blackwell (born February 28, 1948), currently serves as the secretary of state for the U.S. state of Ohio. Mr. Kenneth Blackwell (Ohio Secretary of State) and Mark Osborne (ECI-USA) having a conversation at the E-Crane® headquarters in Bucyrus Ohio.

Workboatshow 2006 New Orleans, Louisiana is coming up

2006-11-03

After a year hiatus The International WorkBoat Show will return to New Orleans, LA in 2006. We feel strongly in our support of the city during it’s rebuilding efforts and hope that you will join us in celebrating the rebuilding and rebirth of a great community. “It’s important to continue the WorkBoat Show’s long association with New Orleans for several reasons. The city and surrounding region remains a hotbed of workboat activity. It’s where the offshore workboat industry got its start over 50 years ago when New Orleans-based Tidewater launched the first energy...

Fourth E-Crane successfully commissioned in Bangladesh

2006-11-01

Dhaka, November 2006: The decision to build a new sugar refinery was taken early 2005. Monem Sugar Refinery Ltd (MSRL) looked carefully at their options for the unloading of ships with Brazilian sugar. The extensive market survey resulted earlier this year in the purchase of a state-of-the-art 700-series E-Crane® with 26 metres (86 feet) outreach. The crane left the assembly shop on-time in Belgium early july 2006. Finally and after a long voyage from Antwerp to Dhaka, with transloading in the harbor of Chittagong, the crane arrived in Dhaka early October. The erection of the E-Crane® started...

All ships great and small Schelde-Natie unloads them all

2006-10-25

October 8th, 2006: Schelde-Natie unloads first Panamax size vessel with new E-Crane®(*) “Does size matter…” is a question often asked ! When looking at the Schelde-Natie operations at the Cargill dock (dock 506) in the harbor of Antwerp the answer is without any doubt: no. Indeed, no matter the size of your barge, ship or vessel, Schelde-Natie provides an efficient and immediate 4-star service unloading rapeseed for Cargill. On October 8th a Panamax (**) vessel arrived early in the morning at the dock. It was the first time that a vessel of this size was going to be offloaded using the newly...

2006 Materials Handling Seminar

2006-09-14

MATERIALS HANDLING SEMINAR(15TH CONSECUTIVE ANNUAL)September 13, 2006 MARRIOTT COLUMBUS NORTH6500 Doubletree AvenueColumbus, Ohio 43229 American Electric Power (AEP) invites some preferred vendors to their annual meeting and technical Seminars to familiarize their personnel with their vendors and to offer an opportunity to socialize in a less formal manner than at a regular business meeting. ECI was selected to participate in the exhibition. Some vendors also give technical presentations to inform and familiarize AEP personnel with new technologies and methods. ECI gave a technical...

Schelde-Natie chooses E-Crane

2006-08-14

Since August 1899, Schelde-Natie has been active in the quality control and the handling of grains. By bringing together the most experienced persons within this sector, Schelde-Natie has grown to become the biggest Belgian controlling company in the sector “Grains, derivatives and vegetable oils” (ca. 4 miljons of tons per year). They’ve also conquered a vast market share in the controlling of cocoa broad beans. Since 1998, Schelde-Natie is “Member of the Schutter-group”, a Dutch control concern with plants all over the world. This allows them to control a ship both on departure...

Ned’s Pride

2006-06-12

Our Senior Design Engineer, Ned Lust from ECI-USA, participated in the Crawford County Customs and Classics car show. Ned parked his Ford Mustang 302 from 1968, a real beauty, in front of the ECI-USA offices. Ned’s “302” was Ford’s attempt to mix the power of a muscle car with the handling prowess of a sports car. The ‘302’ is powered by an engine that was essentially a combination of the new-for-1968 302 in³ (4.9 L) V8 and topped with cylinder heads from the yet to be released new-for-1970 351 in³ (5.8 L) “Cleveland”. This combination meant...

BIR convention in Bejing, China

2006-05-17

As it is the BIR tradition in spring, BIR member firms and any other interested non-member companies specialised in manufacturing and selling machines and equipment used by the recovery and recycling industry are invited to showcase their products and technology. The exhibition areas will be located centrally next to the main meeting room. E-Crane International Europe (ECI-EUR) is present at the BIR Convention and is located @ Booth B3

New E-Crane® for limestone handling

2006-05-16

In close cooperation with the ECI-USA project team lead by Mr. Steve Suter, a Belgium based E-Crane® erection team (Luc Keysabyl and Thomas Lameire) just finished the installation of a new 1500 B-series E-Crane® on the Ohio River at the American Electric Power, Mitchell Plant – Cresap, West Virginia! The E-Crane® will offload limestone from barges. This limestone is needed for the flue gas desulfurization (FGD) systems inside the Mitchell Plant. FGD systems, commonly called “scrubbers,” reduce sulfur dioxide emissions, a contributor to acid rain, by up to 98 percent....

Customer Review: “I saw a true masterpiece”

2006-05-11

These very beautiful photographs were taken by Mr serge Milois (Multiserv) and made available to us. We can praise Mr Milois for his artistic capabilities because these photographs really are sublime. Mr Lieven Bauwens, Director E-Crane® Worldwide/Indusign mentioned: “To my opinion, these photographs are true masterpieces” Source: Mr Serge Milois, Multiserv (B)

Charleroi, Belgium: E-Cranes in full production

2006-04-24

After the initial start-up at the end of September 2005 and the official inauguration on 23th February 2006, the new Carinox stainless steel plant at Charleroi, Belgium is now well underway to achieve a production of 1 million tonnes of stainless steel per year. The stainless steel scrapyard feeding the steelmill and run by MultiServ, the single largest provider of outsourced on-site mill services, is now fully operational. For loading the huge 150 m3 scrap baskets MultiServ is using the reliable and well proven E-Crane® technology. Currently 2 E-Cranes® with an outreach of more then 38...

E-Crane® Bowling Team @ USBC Tournament

2006-04-12

The tournament is the USBC Tournament (United States Bowling Congress). The tournament is held starting Feb. 11, 2006 until July 2, 2006 at the American Bank Center located in Corpus Christi, TX, USA. It changes location each year…last year it was held in Baton Rouge, LA, USA… next year it will be held in Reno, NV, USA. Approximately 12,000 (5 person teams) bowl in this event annually… 60,000 bowlers. The E-Crane® Bowling Team (from left to right: Chuck Moore, Bill Hansen, Mark Osborne, Dan Shaw and Bill Shaw E-Crane® Bowling Team visiting the 2000 Series 18450CR-D E-Crane @ Corpus...

Time for celebration!

2006-03-31

Mrs. Marleen Van Gemst and Mr. Jan Depoorter from Indusign/E-Crane Worldwide celebrate their 50th anniversary When someone turns 50 it is party time at E-Crane Worldwide ! In the month of March and April Mrs. Marleen Van Gemst and Mr. Jan Depoorter celebrated their 50th anniversary so this means time for cakes, friends and lots of fun… Marleen works at Indusign in our Purchasing Department. Today she is a highly respected colleague and responsible for the administration and follow-up of part orders and shipments. Jan works as a senior designer in the engineering department and in addition...

Factory Acceptance Testing (FAT) in full swing

2006-03-27

Indusign/E-Crane Worldwide recognises that factory acceptance testing (FAT) is another important phase in our quality assurance program. We strongly believe that intensive factory acceptance tests: reduce the time for the erection of the crane at its final destinationreduce the costs for assemblyinstallation and tuningimprove the overall quality of our products After the intensive factory tests are completed the crane will be disassembled into major components for shipment to China. Furthermore all major points of attachment will be match-marked to facilitate final assembly and all exposed...

NSPI chooses 2000 Series E-Crane

2006-03-27

As a result of the recent changes in the fuel availability for the Province of Nova Scotia, NSPI decided to construct the Point Tupper Terminal to import low sulphur coal for their Lingan, Point Aconi, Tupper and Trenton plants. Point Tupper is located in the Strait of Canso. This area has been free of ice since 1955 and is located on the “Great Circle Atlantic Shipping Route” which places it directly in the path of international shippers. NSPI searched for the optimum offloading solution and decided to purchase a 2000 Series, Model 21382 from E-Crane, USA, equipped with a 30yd3 bucket and...

New 1500B Series E-Crane loaded onto vessel

2006-03-17

Source: BOSCHMANS & CO bvba

ISRI 2006 in Las Vegas

2006-03-08

April 2-6, 2006 | Mandalay Bay Resort & Casino | Las Vegas Mark Osborne E-CRANE® @ Booth #202 (ISRI 2006) Source: ECI-USAFloorplan taken from the ISRI Website

Growing strength of our service departments

2006-02-14

Our service engineers are on call 24 hours a day to ensure a rapid response to any type of breakdown or emergency. With the support of our workshops and parts departments we can keep downtime to the absolute minimum. Source: ECI-USA

Landing way Depot, Petaluma, CA redevelops River terminal

2006-02-13

Landing Way Depot, Inc. recently redeveloped its Petaluma River terminal to accept barges carrying construction aggregates mined in British Columbia. These aggregates are moved from bulk carriers in the San Francisco Bay onto six custom-designed 4000 ton barges, and then moved to the Landing way side on the Petaluma river during the incoming tide. As the centerpiece of terminal operations, Landing Way Depot selected a pedestal-mounted series 1500, model 11264, E-Crane with a reach of 86 feet and equipped with an 8 cubic yard bucket. Limited river depths and a tidal range of 8 feet demands...

Boys B1 Hockey Team of MHC Tempo

2006-02-13

E-Crane Internation – Europe (ECI-EUR), official sponsor of the Hockey Team at Bergen-Op-Zoom, The Netherlands. Source: ECI-EUR

E-Crane® Worldwide / Indusign NY2006 celebration

2006-01-13

The ECI Worldwide/Indusign Personnel was very pleased… “It’s always difficult to gather all personnel @ the same place @ the same time, but noone wants to miss this NY2006 reception” “Our Director Lieven Bauwens held a short but straight-to-the-point speech in which he promised a very successfull and busy 2006” “It’s always nice to learn to know your colleagues in an informal sphere” “It’s an annual habit to look out for the second Friday of January to bless the New Year with a snack and drink together with all the...

Shamrock Materials finds an environmentally sound solution

2005-12-23

Preamble: Shamrock Materials Is the premier supplier of ready-mix concrete, concrete stone and landscaping products for northern California. Shamrock receives PCC ( Portland Concrete Concentrate ) and Aggregate from suppliers in British Columbia, Canada. Problem Freight cost and environmental impact by moving large quantities of bulk materials with trucks. Solution In order to meet the increasing demand for Shamrock’s products, Shamrock decided to change their operations drastically by expanding their Petaluma River terminal, constructing 6 custom made barges on site and...

Goldkist needs more chicken feed

2005-12-13

Preamble Goldkist is the second largest poultry producer in the country. Goldkist markets 14 million birds per week that need to be fed! Problem Demand from Goldkists, Guntersville, AL. feed mill was outstripping supply. The existing, high maintenance “marine leg” bucket unloader took up to 15 hours to unload a barge. Solution In order to meet the increasing demand for chicken feed, Goldkist decided to replace the “marine leg” with a more modern, productive material handler. Specs 700 series E-Crane®, Model 4264. This E-crane features an outreach of 86 ft a maximum duty...

AT Massey Installs E-Crane® at Carmeuse Lime

2005-12-12

Carmeuse Lime in Maysville KY mines limestone for the production of lime and construction aggregate. Lime is used by electric power utilities and other consumers; it is produced in a coal fired kiln and is used as part of the combustion flue gas cleaning in today’s modern power plants. With the goal of reducing fuel transportation and handling costs, Carmeuse Lime contracted with AT Massey Energy / Roadfork Development for a long term coal supply contract for the Maysville facility. The agreement also included significant upgrades to peripheral equipment, coal storage and barge unloading. AT...

First day of a 3-day professional training regarding hydraulic hoses and couplings

2005-11-25

Friday, 25th November 2005: First day of a 3-day professional training regarding hydraulic hoses and couplings was held by the supplier on-site at Indusign. The subject of the training aroused wide interest among the Indusign/E-Crane Worldwide service engineers and the office personnel.

Denolf Recycling in Brugse haven gecounterd door B-Cargo

2005-11-18

Onlangs werd bij Denolf Recycling langs de Louis Coiseaukaai in Brugge, in de volksmond nog steeds gekend als de Brugse Scheepssloperij, een nieuwe verwerkings en havenkraan in gebruik genomen. Eind vorig jaar kreeg Denolf Recycling, in Brugge goed voor de verwerking van zo’n 40.000 ton schroot per jaar, vanwege B-Cargo, de spoorvrachtafdeling van onze nationale spoorwegen, het bericht dat, gezien zij in de Brugse achterhaven nog de enige spoorklant waren, met ingang van 1 januari 2005 de tarieven voor het spoortransport drastisch omhoog zouden gaan. De volledige kostprijs voor...

E-Crane® solves Nova Scotia Power’s unloading conundrum

2005-11-12

Nova Scotia Power (NSPI) seeks economy and flexibility from their offloading equipment. As a result of the recent changes in the fuel availability for the Province of Nova Scotia NSPI, decided to construct the Point Tupper Terminal to import low sulfur coal for their Lingan, Point Aconi, Tupper and Trenton plants. Point Tupper is located in the Strait of Canso. This Area has been free of ice since 1955 and is located on the “Great Circle Atlantic Shipping Route” which places it directly in the path of international shippers. NSPI searched for the optimum offloading solution...

ECI-USA succesfully commissioned impressive 2000 Series E-Crane

2005-10-18

Port Hawkesbury, Nova Scotia (August, 2005) – ECI-USA and Nova Scotia Power (NSPI), together with Montreal-based Savage CANAC Corporation (Savage) and CBCL have succesfully commissioned the impressive 2000-series E-Crane on the dock at the Point Tupper Marine Terminal. The final commissioning and acceptance tests for this E-Crane were done during the unloading of 80.000 tons of coal out of the the Panamax vessel ‘Salvatore Caffiero’. NSPI (Phillip, Graeme and their team), CBCL (Dan and Randy with their team), Savage (Rick and his team)… thanks very much for all the efforts and...

Carinox – A team works

2005-10-11

MultiServ lands a major role at Arcelor’s new stainless steel mill being built in Belgium MultiServ will start a major new 10-year contract next September working at a brand new Arcelor stainless steel mill in Belgium. Currently under construction, the Carinox site will have the capacity to produce one million tons of stainless steel. MultiServ will provide scrap yard management, slag pot carrying, and slab logistics services. MultiServ will also be responsible for operating and maintaining the customer’s four slab grinding machines. Arcelor, the world’s largest steelmaker,...

E-Crane at Denolf Recycling just commissioned in the port of Bruges.

2005-09-28

Brugge, Belgium (October 28th, 2005): When operations at a scrap yard reach a certain level of sophistication, acquiring a material handling machine that can handle high volumes and provide significant reach becomes a necessity. E-Crane Worldwide/Indusign is committed to provide scrap material handling solutions that are more efficient, faster and more secure than ever before. In addition to this, E-Crane® solutions are developed for quality and durability. Customers can be sure that our equipment will last and last. In January 2005 the decision was taken by the Belgium based Galloo Group...

Carinox site will have the capacity to produce one million tons of stainless steel

2005-08-31

Multiserv will start a new 10 year contract this month working at a brand new Arcelor stainless steel mill in Belgium. Currently under construction, the Carinox site will have the capacity to produce one million tons of stainless steel. Multiserv will provide scrap yard management, slag pot carrying, and slab logistics services. Multiserv will also be responsible for operating and maintaining the customer’s four slab grinding machines. At the heart of the scrap management operation are two 1000 Series 7382 E-Cranes. The two cranes will work simultaneously offloading and sorting scrap...

Another succesfull on-site installation

2005-07-04

After a succesfull on-site installation, start-up and tuning of the 2000-series E-Crane® during the month of june, the Point Tupper Marine Terminal is now ready to provide greater access to vessel optionality!

E-Crane® arrived and is being installed on the Nova Scotia Power site

2005-06-13

A massive crane which will allow Nova Scotia Power’s new coal-handling terminal to accomodate much larger vessels arrived at the Point Tupper Marine Terminal, Sunday. The E-Crane®, valued at about $5 million, was designed and fabricated in Belgium by Indusign and was loaded on the transportation vessel Jumbo Fairpartner at the port of Flushing, the Netherlands. It will allow for the offloading of bulker-type vessels rather than just the belted self unloaders the terminal currently handles. The E-Crane® can handle up to 800 tonnes of product per hour. The coal terminal went into...

E-Crane® en route from Flushing to Nova Scotia, Canada

2005-06-02

The brand new 2000 Series E-CRANE®, Model 21382GA-E – the major feature of the Pt Tupper Marine Terminal project – is now sailing to Nova Scotia, Canada The previously erected E-Crane®, designed for offloading Panamax size vessels (reach 40 meters, weight 450 tons and a liftcapacity of 35 tons), is shipped in 1 piece. (ETA Sunday,Monday 5-6/6/2005)

E-Crane® Demo Days 2005 @ Flushing

2005-05-17

Hereby we kindly invite you to visit our “E-CRANE® DEMO DAYS 2005” on the 19th and 20th of May at Flushing (Vlissingen) A completely erected 2000-series E-Crane®, designed for offloading Panamax size vessels (reach 40 meters, weight 450 tons and a liftcapacity of 35 tons), is our eyecatcher this year. We would like to use this opportunity to provide additional information and to demonstrate our capabilities using other very interesting projects that have been realized for our customers worldwide (DDS multi-modal terminal at Puurs, CARINOX-Multiserv scrap catering project). Thursday,...

Review: Global Material Services

2005-03-23

1) During the May-Dec 2004 season GMSII: 4030 hours of Runtime…..22.4 hours of downtimeGMSIII: 4575 hours of Runtime…..28.1 hours of downtimeStoppage time attributed to cranes is less than 0.6% of the total operating hours! The two cranes run around the clock from May 15 to December 15, approximately 210 days. During that time, two E-Cranes discharged over 5.4 million metric tons of bauxite…or more than 3000 Jumbo River Barges. An average of 15 Jumbo barges discharged per day! Mr. Luis Mok, General Barge Foreman for Global Material Services Venezuela (GMSV) was reviewing the operating...

Renewed E-Crane Rally Team Website

2005-03-23

Review: Global Material Services

2005-03-23

1) During the May-Dec 2004 season GMSII: 4030 hours of Runtime…..22.4 hours of downtime GMSIII: 4575 hours of Runtime…..28.1 hours of downtimeStoppage time attributed to cranes is less than 0.6% of the total operating hours! The two cranes run around the clock from May 15 to December 15, approximately 210 days. During that time, two E-Cranes discharged over 5.4 million metric tons of bauxite…or more than 3000 Jumbo River Barges. Anaverage of 15 Jumbo barges discharged per day! Mr. Luis Mok, General Barge Foreman for Global Material Services Venezuela (GMSV) was reviewing the operating...

A new 700 Series E-Crane®, type 04248PD-E successfully installed.

2005-02-09

Approximately a week ago a team of Indusign and ECI-USA service engineers successfully finished installation of a new 700 Series pedestal E-Crane®.

Press Release: Got Coal?

2005-01-08

Source: Dry Cargo International, Issue n°.64, October 2004

First job for the new E-Crane at the De Dijcker Terminal

2005-01-06

First job for the new E-Crane at the De Dijcker Terminal:– loading woodchips in a coaster. Loading capacity over 1200 m3 per hour with crane driver Carl ! ***(Click the images to enlarge!) Second job for the new E-Crane at the De Dijcker Terminal:– unloading peat for the new Kalloveen facility. In free digging circimstances cranedriver Carl managed to unload nearly 1000 m3/hour job and this after only a couple hours in the seat. Great job again ! *** (Click the images to enlarge!) DD SHIPPING NV, the storage and transshipment...

Exceptional Transport

2005-01-05

Onderdelen met uitzonderlijke afmetingen vergen soms bijzondere voorzorgen en maatregelen bij het verhandelen. Het Indusign/E-Crane team van onze montage werkplaats te Adegem heeft hierbij in de loop van de jaren een grote ervaring opgebouwd, zoals ook mag blijken uit onderstaande videoclip. Hierin is het verladen te zien van een 33 meter lange en 60 ton zware kraanarm op 24 december jonstleden. Heavy components and equipment with exceptional dimensions require specialised procedures and unique measures when moved and/or shipped. The E-Crane team at our assembly shop in Adegem has the...

E-Crane featuring on local transporting Calendar

2005-01-04

Happy X-Mas & A Happy New Year!

2004-12-22

Indusign, ECI-USA and ECI-EUR wish all our contacts a Merry X-Mas and A Happy New Year

Recycling Benelux Magazine: E-Crane®

2004-12-22

De kranen van E-Crane zijn balanskranen die in statische uitvoering elektrohydraulisch worden aangedreven. Door dit principe realiseert men lage energiekosten voor het bedrijf van de kraan. Het onderstel is veelal statisch uitgevoerd als pylon, maar ook constructies met rupsen zijn mogelijk waarbij gebruik wordt gemaakt van op de markt verkrijgbare systemen.De cabine is op de statische kranen vast aangebracht. De benodigde hoogte komt in dat geval tot stand door de toegepaste pylon. Ook zijn uitvoeringen met een cabine op een hydraulisch beweegbare arm gerealiseerd. De lengte van de giek en...

Two 1500 Series E-Cranes are being erected @ the same time…

2004-11-28

Two erection teams are installing E-Cranes in both Indiana, USA and Puurs, Belgium One of the teams is erecting a 1500 Series 9317 E-Crane on gantry in Belgium. The other team is erecting a 1500 Series 9264 E-Crane on pedestal in the USA.

Fully revised E-Crane put back into service…

2004-11-04

Galloo, one of Belgiums leading scrap processors, had their first equilibrium crane fully overhauled… Gallloo, one of Belgiums leading scrap processors, based at Menen nearby the Frech border, is using E-Crane technology for many, many years. Recently the decision was taken to overhaul their first equilibrium crane. The crane had been working for over 35.000 hours, feeding a schredder at the Halluin (France) scrap yard. A complete overhaul was done in close cooperation between the technical staff at Galloo (Mr. Nicolas Malfait, Mr. Eddy De Witte and Mr. Danny Desmadril) and the...

Indusign visits Rothe Erde in Germany…

2004-11-04

For years Rothe Erde (Rotek) is one of Indusigns/E-Cranes key suppliers. Working close together, both Indusign/E-Crane and Rothe Erde have been able to provide the E-Crane users with the most reliable swing bearings available in the market today… Together with our local representative, Mr. Freddy Geets, Indusign was invited for a factory tour in Germany. Due to the great hospitality of Mr. Norbert Steinau (Rothe Erde Germany) and Mr. Bernard Krüsemann, this visit was both interesting and pleasant… Mr. Geets will retire by the end of this year. We at Indusign/E-Crane thank...

AT Massey Installs E-Crane® at Carmeuse Lime

2004-10-13

Carmeuse Lime in Maysville KY mines limestone for the aggregate Industry and converts limestone into lime in a coal fired kiln. This lime is used by Utility companies and other consumers to reduce flue gas emissions. With the goal of reducing fuel transportation and handling costs, Carmeuse Lime contracted with AT Massey Energy / Roadfork Development for a long term coal supply contract for the Maysville facility. The agreement also included significant upgrades to peripheral equipment, coal storage and barge unloading. AT Massey will provide turnkey responsibility for all coal handling services...

E-Crane® benefits from willingness to replace cable cranes with equilibrium cranes

2004-10-08

E-Crane®, of West Virginia, already claims to be benefiting from customer willingness to replace cable cranes with equilibrium cranes, as the latter’s greater flexibility and greater ability to clear out barges combined with adjustable downforce and greater grab position accuracy pay off. Now, the company says, it is bringing new zeal to optimal operations of the equilibrium cranes it markets. Its automatic “boom float”, for example, has been developed to operate during the grab closing phase so that the boom is automatically allowed to move up slightly to achieve better...

E-Crane® Service Engineers are installing a new 700 Series E-Crane® in Bangladesh

2004-10-07

A team of Indusign Service Engineers is installing a new 700 Series E-Crane®, Type 4264PD-E in Bangladesh. Some shots taken on site! Putting the Chassis on the column Crane is almost ready for testing and fine-tuning

General E-Crane® Presentation Animation

2004-09-16

This animation was realized by E-Crane® Student Designer Steve Osborne, with input from the Indusign Design, Engineering and DTP Department This animation was realized by E-Crane® Student Designer Steve Osborne, with input from the Indusign Design, Engineering and DTP Department This animation was realized by E-Crane® Student Designer Steve Osborne, with input from the Indusign Design, Engineering and DTP Department

Press Release: Dry Cargo International – September Issue

2004-09-14

Nova Scotia Power Inc. (NSPI), Nova Scotia Canada was looking for the most efficient, economic way to offload coal for the Point Tupper Coal Terminal in the straight of Canso. The terminal will import approximately 1.0 million metric tons coal for the Point Tupper and Trenton Generating Stations. The coal will be supplied from coal basins throughout the world and shipped in Panamax bulk carriers to provide NSPI with the most cost effective and environmentally friendly fuel solutions. The terminal has been designed for a potential increase in volume of up to 4 million tons per year. NSPI...

For Professionals From Professionals

2004-09-14

When conventional excavator can’t do the job; a dedicated continuous unloader is too expensive; consider the E-Crane®. The right productivity at the right price! E-Crane®E like EquilibriumE like Energy EfficientE Like Easy to maintainE like Easy to ownE like Ergonomic Design The design incorporates a unique parallelogram system and counterweight using gravity to its advantage. Horsepower requirements are reduced by up to 50%, while maintaining high productivities at long outreaches. To arrange a visit to see an E-Crane®in action, call us today. Learn why the advanced E-Crane®...

B&N E-crane® Site Visit & E-Crane® Field Evaluation

2004-09-14

From our site visit on Friday, September 3, 2004. Overview of Jobsite and E-Crane®B&N Coal provides coal offloading and blending services to the AMP Ohio power plant. Local coal is trucked to the plant and higher quality (low sulfur) coal arrives by barge. The E-Crane® discharges the barges. B&N is responsible for all fuel handling and blending until it is inside the plant. Real time changes in fuel quality are monitored / adjusted continuously by B&N personnel based on plant requirements. E-Crane® – Series 1000 Model 7264 Commissioned October 1999Horizontal outreach...

New Age Material Handling

2004-08-27

Service Engineer Michael H. prepares for marriage with traditional Flanders “Schieting”

2004-08-25

The “Schieting”, or Shooting in English, occurs a few days before a couple is to be married. Several guns are put near the house of the bride and family and friends are invited to attend. These guns have several holes which are filled with a powder mixture. Pins are placed through the holes and when the pins are hit with a hammer the powder mixture explodes. Once the shooting is finished, a heart is prepared on the ground containing the initials of the bride and groom. Together they light the powder and the heart burns bright for everyone to see. This unique event descends from...

E-Crane Rally Team during the Ieper/Ypres 2004 Rally

2004-07-02

Last Friday Indusign personnel was invited to watch start of the Rally weekend. A meet and greet with ex top-soccer keeper Jean-Marie Pfaff was organized during the evening. *** **

E-Crane 4264PD-E successfully installed

2004-06-25

The Indusign/ECI-USA erection team succesfully installed a new 700 Series E-Crane™, type 4264PD-E (Click to enlarge) (Click to enlarge) (Click to enlarge) Erection of the E-Crane™ – Connecting the counterweight to the Boom and Connecting Rod Assembly succesfull E-Crane™ fully functional

E-Crane Rally Team: Ieper 24h Rally, 2-4 July 2004

2004-06-22

E-Crane Rally Team haalt BV naar IeperJ.M. PFAFF te gast tijdens de 24h van Ieper !!

Local Press: Shipping Out!

2004-06-12

From the Saturday June 12 edition of the Charleston Gazette… The E-Crane™ is making big news in Charleston Jean-Marie Verschoore and Bob Flintack fill counter-balance weights with cement as a large hydraulic crane is prepared for shipment from Port Amherst to Maysville, Ky. The crane was shipped from Antwerp, Belgium, where it was made, to Baltimore, Md., then trucked to Port Amherst in 20 pieces. Amherst industries personnel helped manufacturer’s representatives re-assemble the crane into four parts for barging down the Kanawha and Ohio rivers to Maysville, where it will...

E-Crane Team is erecting a new E-Crane in the US

2004-06-01

The Indusign/ECI erection team is installing a new 2000 Series E-Crane, Type 15317PD-E (click to enlarge photos)

New E-Crane™, model 4264GA-E on site in Lier, Belgium

2004-05-25

Overview E-Crane™ on site Last week a new E-Crane™ (replacing a very old Equilibrium Crane) on gantry was erected by the Indusign/ECI team and shortly after succesfully commissioned. Erection of the E-Crane (click to enlarge) E-Crane unloading 1200 tons ship (click to enlarge) E-Crane filling the hopper (click to enlarge)

New E-Crane™, model 4264GA-E on site in Lier, Belgium

2004-05-25

Transportation of a new 700 Series E-Crane™

2004-05-03

A new 700 Series E-Crane for the Belgian market is being loaded onto trucks and will be erected as from this week. (click to enlarge pictures) Cement Truck filling the E-Crane Counterweight Cement Truck Filling the Counterweight with cement Main Chassis arrives on Site Several parts arrive on Job Site 3D Simulations

Transportation of a new 700 Series E-Crane™

2004-05-03

ECI / IEC Marketing Brochure

2004-05-03

Now… You Can Team Genuine E-Cranes With IEC Floating Dock Barges To Increase Productivity… Minimize Costs. The new E-Crane/Interstate association will benefit customers by providing a wide range of proven alternatives to improve safety, increase productivity and handling capacity, reduce energy consumption and minimize operating costs. By joining forces, these two respected companies can now combine their versatile, high quality products to form a single source for efficient, trouble-free material handling systems. This includes Interstate’s floating dock barges equipped...

Transportation of 2 new E-Cranes

2004-04-26

As of today 2 new E-Cranes are leaving the Indusign workshops. Both (700 Series, Model 4264PD-E) cranes will be loaded onto vessel at the Port of Antwerp.

SUBSCRIBE TO OUR NEWSLETTER

Newsletter signup

E‑Crane Worldwide

Koekoeklaan 53
9991 Adegem
Belgium

Contact us

T +32 9 378 04 44

info@e-crane.com

Category: Newsflashes

SUBSCRIBE TO OUR NEWSLETTER

Newsletter Signup Form

Follow us

E‑Crane Worldwide

Contact us